Einige Seiteninhalte, Dokumente und Videos sind nur auf Englisch verfügbar.
CASE application

Verbundwerkstoffe, Guss und Verguss

Materials for laminates, encapsulation, composites and casting.

Composites, casting & potting end use
APPLICATION TO MATERIAL

Choose the component’s role.

Explore the documented candidates and the properties relevant to their role.

35 documented candidates across 9 roles

View all matching grades

Examples show different formulation roles. Choose a role to explore alternatives for that job.

Modified polyamide / amidoamine

Dromide 9334

AHEW
130g/eq
Viscosity @ 75°C (Brookfield)
650-950cP; ASTM D 2196
Gel time @ 25°C (150gm)
100-120min
Mixing ratio with epoxy resin (EEW 190)
55phr
Modified aliphatic polyamine

Drocure 5083

AHEW
76g/eq
Viscosity @ 25°C (Brookfield)
30- 80cP; ASTM D 2196
Gel time @ 30°C (100 gms)
100 - 130min
Mixing ratio with epoxy resin (EEW 190)
40phr
Epoxy cure accelerator

Drocure 5121

Viscosity @ 25°C (Brookfield)
800 - 1200cP; ASTM D 2196
Amine value
580 - 640mg KOH/g; ASTM D 2074
Gel time @ 25°C (100 gms)
3 - 8min
Mixing ratio with epoxy resin (EEW 190)
43phr
Explore selection examples
APPLICATION / MATERIAL ROUTES

Choose the processing route and reactive pair.

Separate resin, curing-agent and modifier roles. The examples below are starting points within the documented composites, casting and encapsulation portfolio.

Epoxy resin component3 grades to review

What shapes the choice

These liquid epoxy resin profiles include casting or composites. Compare epoxy type, viscosity and equivalent weight before selecting a compatible curing-agent system.

Grades to review

  • Dropoxy 7250

    Medium-viscosity, solvent-free liquid epoxy resin based on unmodified bisphenol A.

  • Dropoxy 7251

    Medium-viscosity liquid epoxy resin based on modified bisphenol A.

  • Dropoxy 7257

    Low-viscosity modified liquid epoxy resin based on an aromatic glycidyl ether.

Polyamide and amidoamine curing routes3 grades to review

What shapes the choice

Review the stated casting, potting or encapsulation use together with AHEW, mixing basis and processing guidance. These are curing-agent options, not a validated resin–hardener pairing.

Grades to review

  • Dromide 9334

    A medium-viscosity reactive polyamide curing agent for epoxy resins.

  • Dromide 9360

    A low-viscosity reactive polyamide curing agent for epoxy resins.

  • Dromide 9493

    A reactive polyamide curing agent for epoxy resins with medium to low viscosity.

Amine routes for casting and laminates3 grades to review

What shapes the choice

the curing-agent chemistry and available cure data for the intended process. Define part size and temperature before interpreting working-time data. vergleichen

Grades to review

  • Drocure 5083

    A modified aliphatic amine hardener for liquid epoxy resin, with low viscosity and long pot life.

  • Drocure 5310

    A low-viscosity modified aliphatic amine curing agent for epoxy resin.

  • Drocure 8310

    A viscous aromatic amine mixture based on methylenedianiline (MDA) and oligomers, used to cure epoxy resins.

Reactive viscosity modifiers2 grades to review

What shapes the choice

A reactive diluent changes more than flow. Review its epoxy equivalent weight and effect in the selected resin–curing-agent formulation before use.

Grades to review

  • Drodil 1210

    Monoglycidyl ether of C12–C14 fatty alcohol.

  • Drodil 1230

    Light-yellow liquid mono-epoxide based on phenol.

Understand the application
UNDERSTAND THE APPLICATION

Match resin flow and cure to the part.

A laminate, a bulk casting and an encapsulated assembly have different processing needs. Begin with the geometry and the manufacturing method.

Match resin flow and cure to the part. Separate resin and curing-agent components join a filling path into a representative mould. Reinforcement, filling behaviour and cure validation are distinct stages. Four labelled stages correspond to the text controls. Illustrative, not a system specification. REACTIVE SYSTEM AND FILLING PATH 1Part & processMould / reinforcement / assembly2Resin & curing agentResinCuringagent3Flow & filling4Cure & validationRepresentative part + tests Process roles only; no resin–hardener pairing or ratio is prescribed.
Match resin flow and cure to the part.Resin and curing agent feed a representative filling path into a mould. Part geometry, flow and cure validation have distinct roles. Simplified diagram. Full stage explanations appear in the adjacent controls.1Part & process2Reactive componentsResinAgent3Flow & filling4Cure & test
SELECTION CONSIDERATION / 01

Part & process

In a laminate, resin works with a reinforcement. In casting or potting, it fills a mould or surrounds an assembly. The space to be filled helps define the processing brief.

Selection focus

Reinforcement or assembly, part size and filling method.

Discuss this requirement

Evaluate materials in the complete formulation and intended process.

How to review an epoxy resin and curing-agent pair →

Prepare a detailed technical brief Optional
YOUR NEXT CONVERSATION

Prepare your technical brief.

Answer only what you know. Review and edit the summary before continuing to the enquiry.

All answers are optional. Leave anything you do not know blank.

The summary updates as you answer.

Write my own enquiry

These answers prepare a discussion brief; they do not select or approve a grade. Your draft stays in this browser tab.