Algunos contenidos, documentos y vídeos solo están disponibles en inglés.
CASE application

Recubrimientos generales e industriales

Explore documented uses in primers, clear finishes, lacquers, stoving coatings and industrial protection. Start with the substrate, finish and curing process, then identify the component role your formulation needs.

General & industrial coatings end use
APPLICATION TO MATERIAL

Choose the component’s role.

Explore the documented candidates and the properties relevant to their role.

155 documented candidates across 49 roles

View all matching grades

Examples show different formulation roles. Choose a role to explore alternatives for that job.

Modified polyamide / amidoamine

Dromide 9310X

AHEW
808g/eq
Viscosity @ 40°C (Brookfield)
1800-3000cP; ASTM D 2196
Mixing ratio with epoxy resin (EEW 525)
154phr
Amine value
50-65mg KOH/g; ASTM D 2074
Waterborne epoxy curing agent

Droquamine 720

AHEW
210g/eq
Viscosity @ 25°C (Brookfield)
30,000 - 50,000cP; ASTM D 2196
Gel time @ 25°C (150 gms)
50 - 70min
Mixing ratio with epoxy resin (EEW 190)
100 - 150phr
Modified aliphatic polyamine

Drocure 5083

AHEW
76g/eq
Viscosity @ 25°C (Brookfield)
30- 80cP; ASTM D 2196
Gel time @ 30°C (100 gms)
100 - 130min
Mixing ratio with epoxy resin (EEW 190)
40phr
APPLICATION FILM · 1:21

Revestimientos flexibles y selladores para hormigón

See how binder selection influences flexibility, adhesion and crack bridging on concrete.

All application films
Leer la transcripción

This cured coating sample bends as it is lifted. It shows the flexibility a formulator can build into a coating or a sealant. The starting material is a clear, solvent-free aromatic prepolymer. The finished formulation determines how the material flows, bonds and cures. In a sealing compound, the material fills a joint between concrete sections. In a high-build coating, it forms a flexible layer across the surface. Here is what crack bridging means. The coating stays continuous over a crack in the concrete. Test the finished system to establish how much movement it can accommodate. The binder offers excellent adhesion to concrete. For formulators, it is also compatible with ester solvents and aromatic hydrocarbons. Two properties guide formulation. Isocyanate content helps set the proportions. Viscosity helps assess mixing and application. Keep the prepolymer sealed and protected from moisture. Contact D. R. Coats to discuss your substrate, application and sample requirements.

Explore selection examples
APPLICATION / MATERIAL ROUTES

Match the coating task to the component role.

These representative routes span resin, polyol, isocyanate and curing-agent roles. Use the stated application of each grade to build a shortlist for your coating process.

Primers and clear finishes3 grades to review

What shapes the choice

Dropoxy 7450X is an epoxy resin listed for primers, topcoats and clear coatings. Drothane 1174 is a polyol listed for clear coatings and exterior systems, while Drodur 3300 is an HDI trimer listed for lightfast topcoats. Define the required role and complete cure system for each candidate.

Grades to review

  • Dropoxy 7450X

    Liquid epoxy resin supplied as a 75% solution in xylene.

  • Drothane 1174

    Castor-oil-based polyol offering good UV resistance when cured with an aliphatic isocyanate.

  • Drodur 3300

    Aliphatic polyisocyanate based on an HDI trimer.

Baked and stoving coatings3 grades to review

What shapes the choice

Drodur 3175B is a blocked HDI isocyanate listed for one-component stoving coatings. Dropoxy 7293 lists automotive primers and stoving metal coatings; Dropol 9012 is a phenolic resin for baked metal coating formulations. Describe the heating process and substrate before comparing these different component roles.

Grades to review

  • Drodur 3175B

    Blocked HDI-based isocyanate containing 75% solids.

  • Dropoxy 7293

    Short-oil epoxy ester based on fatty acid.

  • Dropol 9012

    Butylated phenolic resin for baked metal coating formulations.

Industrial protective coatings3 grades to review

What shapes the choice

Dropol 9013 lists industrial protective coatings and primers. Drocure 5186 is an epoxy curing agent with protective and industrial coating uses, and Dromide 9340 lists tank and pipe coatings. State the coating layer, substrate and service exposure in the enquiry.

Grades to review

  • Dropol 9013

    Epoxy-phenolic precondensate.

  • Drocure 5186

    A low-viscosity Mannich-base epoxy curing agent with moisture tolerance.

  • Dromide 9340

    A reactive polyamide curing agent for epoxy resins with medium to low viscosity.

Understand the application
UNDERSTAND THE APPLICATION

Follow the coating from substrate to service.

The surface, application process and finished coating requirements belong in the same formulation brief. Define each before selecting individual components.

  1. Surface and layer

    Identify the substrate and the job of this layer: a primer, intermediate coat or exposed finish. Include the condition of the surface and any existing coating.

    Selection focus

    Substrate, preparation and position in the coating system.

    Discuss this requirement
  2. Application and cure

    Describe how the coating will be applied and dried or cured. Ambient-cure, one-component stoving and other coating processes need their own formulation assessment.

    Selection focus

    Application equipment, carrier system and available curing process.

    Discuss this requirement
  3. Finish and exposure

    Set out the appearance and service conditions required of the completed coating. Use these requirements to evaluate the selected resin, curing agent and other components together.

    Selection focus

    Clear or pigmented finish, appearance and service exposure.

    Discuss this requirement

Evaluate materials in the complete formulation and intended process.

Prepare a technical brief
Prepare a detailed technical brief Opcional
YOUR NEXT CONVERSATION

Prepare your technical brief.

Answer only what you know. Review and edit the summary before continuing to the enquiry.

All answers are optional. Leave anything you do not know blank.

The summary updates as you answer.

Write my own enquiry

These answers prepare a discussion brief; they do not select or approve a grade. Your draft stays in this browser tab.