Dromide 9310X
- AHEW
- 808g/eq
- Viscosity @ 40°C (Brookfield)
- 1800-3000cP; ASTM D 2196
- Mixing ratio with epoxy resin (EEW 525)
- 154phr
- Amine value
- 50-65mg KOH/g; ASTM D 2074
Resins and curing agents for protective coatings, marine environments and corrosion resistance.

Explore the documented candidates and the properties relevant to their role.
85 documented candidates across 28 roles
View all matching gradesExamples show different formulation roles. Choose a role to explore alternatives for that job.
Begin with the substrate, coating system and exposure. Use the shortlisted grades to plan a formulation evaluation.
Review viscosity and the stated epoxy equivalent-weight basis for the intended protective coating.
A low-viscosity reactive polyamide curing agent for epoxy resins.
Investigate where low-temperature or damp-condition application is part of the brief. Confirm performance for the actual substrate and exposure.
A phenalkamine hardener for epoxy systems.
hydroxyl value, supplied viscosity and the co-reactant requirements. vergleichen
Branched, solvent-free castor-oil-based polyol with ether linkages.
Branched, solvent-free polyol based on castor oil.
Branched, solvent-free polyol based on castor oil.
Surface preparation, coating layers and service conditions belong in the same selection brief. Explore their roles before comparing materials.
Steel and concrete present different starting conditions. The preparation method and the condition at application shape the coating specification and the evaluation needed.
Substrate, existing coating, preparation and application conditions.
In a multilayer system, the primer and intermediate coats carry much of the corrosion-protection task. Review the resin and curing-agent combination with the intended film build and application method.
Epoxy resin, curing-agent role, supplied solids and mixing basis.
The topcoat is selected around the finish and exterior exposure required. Its compatibility with the underlying coats matters; changing a layer calls for assessment of the system.
Topcoat chemistry, appearance and intercoat compatibility.
Working time, overcoating and cure are different milestones. Published values are useful only alongside their temperature, batch and test conditions.
Mixing ratio, application temperature and overcoating sequence.
Evaluate materials in the complete formulation and intended process.
How to review an epoxy resin and curing-agent pair →
Answer only what you know. Review and edit the summary before continuing to the enquiry.
The summary updates as you answer.
Write my own enquiryThese answers prepare a discussion brief; they do not select or approve a grade. Your draft stays in this browser tab.