Modified cycloaliphatic polyamine curing agent

Drocure 8313

A modified cycloaliphatic polyamine curing agent for ambient-curing, solvent-free epoxy systems.

Selection properties
AHEW
114g/eq
Viscosity @ 25°C (Brookfield)
400 - 500cP; ASTM D 2196
Gel time @ 25°C (100 gms)
40 - 50min
Mixing ratio with epoxy resin (EEW 190)
60phr
Application advice & supply
WHAT IT OFFERS

Key characteristics

  • Modified cycloaliphatic polyamine chemistry
  • For solvent-free epoxy systems
  • Ambient-temperature cure
MAKE YOUR SHORTLIST

Does it fit your formulation?

Start with an ambient-cured, solvent-free marine coating, high-build floor or grout requirement.

What decides the fit
Compare Brookfield viscosity with the epoxy mixing basis and gel time when planning application. Keep each viscosity or flow-time result tied to its own method.
Bring to your trial
What coating build or floor system, application method and cure temperature are intended?
Properties to review together

Compare published properties

Selected properties with matching published measurement conditions; compare the full profiles before evaluation.
PropertyDrocure 8313This gradeDrocure 5344Compare with
AHEWg/eq11477
Viscosity @ 25°C (Brookfield)cP; ASTM D 2196400 - 50040 - 70
Amine valuemg KOH/g; ASTM D 2074270 - 300440 - 470
WHERE IT FITS

Applications

  • Marine coatings
  • High-build floors
  • Grouts
GRADE DETAILS

Technical data

Read every value with its unit and test conditions.

Source: TDS, 26th October, 2026 Ver.- 2. Values and test methods are as stated in this TDS.

Documents & samples ↑
PropertyValue / rangeUnit & test conditions
AppearanceWater white to pale yellow liquidVisual
Color2 maxCGS; ASTM D 1544
Amine value270 - 300mg KOH/g; ASTM D 2074
Viscosity @ 25°C (Brookfield)400 - 500cP; ASTM D 2196
Flow time @ 25°C by (FC B-4)100 - 125s; ASTM D 2196
AHEW114g/eq
Mixing ratio with epoxy resin (EEW 190)60phr
Gel time @ 25°C (100 gms)40 - 50min
Density @ 25°C (+ 0.02)1.01g/cm3

How to read technical properties · Evaluate the complete formulation in your intended process.