Alguns conteúdos, documentos e vídeos estão disponíveis apenas em inglês.
Non-reactive polyamide — co-solvent

Dromide 930

Non-reactive polyamide resin, soluble in co-solvents, for flexographic and gravure inks and overprint varnish.

Selection properties
Softening point (B&R)
105 - 115°C; ASTM D 1525
Flow time @ 30°C (ford cup B-4) (40% resin, 40%toluene & 20% IPA)
50 - 65s; ASTM D 1200
Acid value
7 maxmg KOH/g; ASTM D 1980-87
Amine value
7 maxmg KOH/g; ASTM D 2074
Aconselhamento de aplicação e fornecimento
WHAT IT OFFERS

Key benefits

  • Good gloss
  • Sharp prints
MAKE YOUR SHORTLIST

É adequado à sua formulação?

A non-reactive polyamide for co-solvent flexographic or gravure inks, with gloss and sharp-print benefits listed.

What decides the fit
Colour and flow measurements use different stated solution recipes. Keep the recipe attached to each property when comparing grades.
Bring to your trial
Which ink solids, toluene/IPA blend and print-definition requirement should the trial reproduce?
Propriedades a analisar em conjunto

Comparar published properties

Selected properties with matching published measurement conditions; compare the full profiles before evaluation.
Component / propertyDromide 930This gradeDromide 933Comparar with
ComponentNon-reactive polyamide — co-solventNon-reactive polyamide — co-solvent
Listed usesFlexo/gravure inksFlexo/gravure inks
Softening point (B&R)°C; ASTM D 1525105 - 115115 - 125
Acid valuemg KOH/g; ASTM D 1980-877 max7 max
Amine valuemg KOH/g; ASTM D 20747 max7 max
WHERE IT FITS

Aplicações

  • Flexo/gravure inks
Prepare a Printing Inks evaluation
GRADE DETAILS

Dados técnicos

Read every value with its unit and test conditions.

Source: TDS, 23rd August, 2024 Ver.- 1.2. Values and test methods are as stated in this TDS.

Documents & samples ↑
PropertyValue / rangeUnit & test conditions
AppearanceYellowish brown granules to flakesVisual
Color (40% solution in Toluene: IPA) (1:1)12 maxCGS; ASTM D 1544
Amine value7 maxmg KOH/g; ASTM D 2074
Acid value7 maxmg KOH/g; ASTM D 1980-87
Flow time @ 30°C (ford cup B-4) (40% resin, 40%toluene & 20% IPA)50 - 65s; ASTM D 1200
Softening point (B&R)105 - 115°C; ASTM D 1525
Density @ 25°C0.98Unit not stated in TDS; ASTM D 4052

How to read technical properties · Evaluate the complete formulation in your intended process.