Castor-oil polyol

Drothane 1145

Branched, solvent-free castor-oil-based polyol with ether linkages.

Castor-oil polyolsExplore bio-based materials
Selection properties
Hydroxyl value
220 - 250mg KOH/g; EN ISO 4629
Viscosity @ 25°C (Brookfield)
2700 - 3200cP; ASTM D 2196
Moisture including volatiles
< 0.2%
Equivalent weight
240 approxg/eq
Application advice & supply
WHAT IT OFFERS

Key characteristics

  • Branched polyol structure
  • Castor-oil base with ether linkages
  • Solvent-free composition
MAKE YOUR SHORTLIST

Does it fit your formulation?

Start with the heavy-duty floor, steel/concrete or pipe-coating requirement.

What decides the fit
Compare the hydroxyl value and supplied viscosity together, then review the stated polymeric-MDI mixing basis.
Bring to your trial
Which isocyanate, substrate and application method will your formulation use?
Properties to review together

Compare published properties

Selected properties with matching published measurement conditions; compare the full profiles before evaluation.
PropertyDrothane 1145This gradeDrothane 1150Compare with
Hydroxyl valuemg KOH/g; EN ISO 4629220 - 250150 - 165
Viscosity @ 25°C (Brookfield)cP; ASTM D 21962700 - 32003000 - 4000
Mixing ratio of polymeric MDI (NCO : 31.5%)phr55 - 5738 - 40
WHERE IT FITS

Applications

  • Heavy-duty floors
  • Steel/concrete coatings
  • Pipe coatings
GRADE DETAILS

Technical data

Read every value with its unit and test conditions.

Source: TDS, 19th May, 2026 Ver. 7. Values and test methods are as stated in this TDS.

Documents & samples ↑
PropertyValue / rangeUnit & test conditions
AppearancePale yellowVisual
Color5 maxCGS; ASTM D 1544
Acid value2 maxmg KOH/g; ASTM D 1980-87
Viscosity @ 25°C (Brookfield)2700 - 3200cP; ASTM D 2196
Hydroxyl value220 - 250mg KOH/g; EN ISO 4629
Hydroxyl content6.6 - 7.6%; EN ISO 4629
Equivalent weight240 approxg/eq
Mixing ratio of polymeric MDI (NCO : 31.5%)55 - 57phr
Moisture including volatiles< 0.2%
Specific gravity1.01—

How to read technical properties · Evaluate the complete formulation in your intended process.