Polyamide ink resins — alcohol-soluble
Sobre esta família químicaOs filtros selecionados são aplicados. Pesquisar na DRC
Mais filtros Função e propriedades de formulação
Explore published property ranges1 comparable property groups
Comparar one formulation role and one measurement basis at a time. Values shown are published intervals, not performance rankings.
Softening point (B&R)
Non-reactive polyamide — alcohol-soluble · °C; ASTM D 1525
2 other grades in the current results have a different role, basis or unavailable numerical data. Clear the range to include them. Exact values and conditions remain available in the results.
Resins for printing ink formulation.
Resultados de produtos
6 products · showing 1–6
Read each value with its unit and measurement conditions. The same properties stay in place as you refine this chemistry.Scroll sideways to see every column.
| Grade / formulation role | Softening / melting point | Solution flow time | Acid value | Amine value | Review |
|---|---|---|---|---|---|
Dromide 903Non-reactive polyamide — alcohol-solubleAplicações e notas de seleção for Dromide 903Alcohol-soluble polyamide resin with good gel resistance and deep-freeze properties. Aplicações High-speed flexo/gravure inks Selection guidance for Dromide 903Use the carrier system and low-temperature packaging requirement to define the trial; read flow time on its specified solution basis. | 105 - 115Softening point (B&R)°C; ASTM D1525 | 25 - 40Flow time @ 30°C (FC B-4) (50% solution in IPA)s; ASTM D 1200 | 7 maxAcid valuemg KOH/g; ASTM D 1980-87 | 7 maxAmine valuemg KOH/g; ASTM D 2074 | |
Dromide 919Non-reactive polyamide — alcohol-solubleAplicações e notas de seleção for Dromide 919Amine-terminated polyamide resin. Aplicações Tintas de laminação Selection guidance for Dromide 919Make the lamination construction the starting point. Compare acid and amine values without treating them as a prediction of bond strength. | 130 - 145Softening point (B&R)°C | 20 - 35Flow time @ 30°C by FC B-4 (30% solution in n-propanol)s; ASTM D 2196 | 3 maxAcid valuemg KOH/g; ASTM D 1980-87 | 8 maxAmine valuemg KOH/g; ASTM D 2074 | |
Dromide 957Non-reactive polyamide — alcohol-solubleAplicações e notas de seleção for Dromide 957Alcohol-soluble, non-reactive polyamide resin with good low-temperature resistance for flexographic inks. Aplicações Packaging inks Selection guidance for Dromide 957Connect the packaging temperature requirement to the trial; published solution flow is measured in n-propanol. | 110 - 120Softening point (B&R)°C; ASTM D 1525 | 25 - 35Flow time @ 30°C by (FC B-4 ) (35% solution in n-propanol)s; ASTM D 1200 | 7 maxAcid valuemg KOH/g; ASTM D 1980-87 | 7 maxAmine valuemg KOH/g; ASTM D 2074 | |
Dromide 958Non-reactive polyamide — alcohol-solubleAplicações e notas de seleção for Dromide 958Low-viscosity, non-reactive polyamide resin soluble in alcohol. Aplicações Milk-pouch inks Selection guidance for Dromide 958Keep the milk-pouch construction and alcohol vehicle in the brief; the listed use does not establish packaging compliance. | 112 - 122Softening point (B&R)°C; ASTM D 1525 | 25 - 35Flow time @ 30°C by (FC B-4) (60% solution in ethanol)s; ASTM D 1296 | 15 maxAcid valuemg KOH/g; ASTM D 1980-87 | 3 maxAmine valuemg KOH/g; ASTM D 2074 | |
Dromide 965Non-reactive polyamide — alcohol-solubleAplicações e notas de seleção for Dromide 965Alcohol-soluble, non-reactive polyamide resin for flexographic printing inks. Aplicações Flexographic inks for plastic substrates Selection guidance for Dromide 965Use the exact plastic and its surface treatment to define the trial; review flow on the published n-propanol solution basis. | 110 - 120Softening point (B&R)°C; ASTM D 1525 | 25 - 35Flow time @ 30°C (ford cup B-4) 35% solution in n-Propanols; ASTM D 1200 | 7 maxAcid valuemg KOH/g; ASTM D 1980-87 | 7 maxAmine valuemg KOH/g; ASTM D 2074 | |
Dromide 968Non-reactive polyamide — alcohol-solubleAplicações e notas de seleção for Dromide 968Modified, alcohol-soluble, non-reactive polyamide resin. Aplicações Inks for untreated substrates Selection guidance for Dromide 968Define the untreated material before selecting the vehicle. Read the IPA solution flow on its specified concentration basis. | 95 - 105Softening point (B&R)°C; ASTM D 1525 | 20 - 30Flow time @ 30°C (Ford cup B-4), 40% solution in IPAs; ASTM D 1200 | 20 maxAcid valuemg KOH/g; ASTM D 1980-87 | 5 maxAmine valuemg KOH/g; ASTM D 2074 |