Isocyanates & prepolymers
About this chemistrySelected filters apply. Search all DRC
More filters Formulation role & properties
Explore published property ranges2 comparable property groups
Compare one formulation role and one measurement basis at a time. Values shown are published intervals, not performance rankings.
NCO content
TDI–PTMEG elastomer prepolymer · %; ISO 11909
0 other grades in the current results have a different role, basis or unavailable numerical data. Clear the range to include them. Exact values and conditions remain available in the results.
MDI, TDI, IPDI and HDI materials.
Product results
3 products · showing 1–3
Read each value with its unit and measurement conditions. The same properties stay in place as you refine this chemistry.Scroll sideways to see every column.
| Grade / formulation role | NCO content | Viscosity | Monomer content | Solids / non-volatile content | Review |
|---|---|---|---|---|---|
Drodur 135TDI–PTMEG elastomer prepolymerApplications & selection notes for Drodur 135TDI–PTMEG ether prepolymer containing 3.5% NCO. Applications Rollers · Linings 2 more applications for Drodur 135
Selection guidance for Drodur 135Use NCO content to define the cure package; identify the part geometry and processing method before trial casting. | 3.2 - 3.8NCO content%; ISO 11909 | 40000 - 60000Viscosity @ 25°C (Brookfield)cP; ASTM D 2196 | < 0.5Monomeric content%; ISO 10283 | Not published | |
Drodur 143TDI–PTMEG elastomer prepolymerApplications & selection notes for Drodur 143TDI–PTMEG ether prepolymer containing 4.3% NCO. Applications High-load rollers · Cast parts Selection guidance for Drodur 143Review NCO and viscosity with the chosen curative; validate the load requirement on the finished part. | 4.0 - 4.6NCO content%; ISO 11909 | 20000 - 30000Viscosity @ 25°C (Brookfield)cP; ASTM D 2196 | < 0.5Monomeric content%; ISO 10283 | Not published | |
Drodur 163TDI–PTMEG elastomer prepolymerApplications & selection notes for Drodur 163TDI–PTMEG ether prepolymer containing 6.3% NCO. Applications Harder cast parts Selection guidance for Drodur 163Set the target part hardness and curative before comparing NCO content; the prepolymer figure alone does not predict finished hardness. | 6.0 - 6.6NCO content%; ISO 11909 | 10000 - 15000Viscosity @ 25°C (Brookfield)cP; ASTM D 2196 | < 0.5Monomeric content%; ISO 10283 | Not published |