Some page content, documents and videos are available in English only.
Browse by chemistry
More filters Formulation role & properties
Choose a chemistry or application to see its formulation roles and property filters.
Product results
223 products · showing 201–220
Cementitious PU emulsion / binder
Castor-oil-based polyol emulsion for three-component cementitious polyurethane screeds used in the food and beverage industry.
Industrial and food-processing floors
- Hydroxyl value
- 75 - 95mg KOH/g; EN ISO 4629
- Viscosity @ 25°C (Brookfield)
- 100 - 400cP; ASTM D 2196
Cementitious PU emulsion / binder
Castor-oil-based polyol emulsion for matt, three-component cementitious polyurethane screeds.
Matt cementitious PU flooring
- Hydroxyl value
- 75 - 95mg KOH/g; EN ISO 4629
- Viscosity @ 25°C (Brookfield)
- 100 - 400cP; ASTM D 2196
Cementitious PU emulsion / binder
Phthalate-free, castor-oil-based polyol emulsion for matt, three-component cementitious polyurethane screeds.
Matt cementitious PU flooring
- Hydroxyl value
- 75 - 95mg KOH/g; EN ISO 4629
- Viscosity @ 25°C (Brookfield)
- 50 - 300cP; ASTM D 2196
Cementitious PU emulsion / binder
Castor-oil-based polyol emulsion used with polymeric MDI as a binder.
Resin-rich concrete coatings · Sealers
- Hydroxyl value
- 505 - 550mg KOH/g; EN ISO 4629
- Viscosity @ 25°C (Brookfield)
- 900 - 1500cP; ASTM D 2196
Flexible castor-oil polyol
Low-viscosity, solvent-free polyol based on castor oil.
Flexible concrete/steel coatings
- Hydroxyl value
- 158 - 168mg KOH/g; EN ISO 4629
- Viscosity @ 25°C (Brookfield)
- 600 - 800cP; ASTM D 2196
Aldehyde / ketone-aldehyde resin
Hard aldehyde resin made from urea and aliphatic aldehydes, with resistance to yellowing.
Printing inks · Paints
- Softening point
- 80 - 100°C
- Flow time @ 30°C (FC B-4) (60% solid solution in xylene)
- 20 - 35s
Aldehyde / ketone-aldehyde resin
Solid condensation product of cyclohexanone and formaldehyde, described as bright and resistant to yellowing.
Universal pigment pastes
- Softening point (R&B)
- 95 - 105°C
- Flow time @ 30°C (FC B-4) (50% solid solution in ethanol)
- 14 - 20s; ASTM D 1200
Aldehyde / ketone-aldehyde resin
Hard ketone-aldehyde resin with a high hydroxyl value, broad binder compatibility and solvent solubility.
Flexo/gravure inks · Paper inks
- Softening point (B&R)
- 105 - 125°C
- Flow time @ 30°C (Ford cup B-4) (50% solid solution in ethanol)
- 21 - 25s; ASTM D 1200
Aldehyde / ketone-aldehyde resin
Phenol-modified ketone-aldehyde resin designed for high-temperature stability.
Printing inks · Coatings
- Softening point (B&R)
- 125 - 135°C
- Flow time @ 30°C by (FC B-4) (50% solid solution in toluene:ethanol) (1:1)
- 15 - 35s; ASTM D 1200
Aldehyde / ketone-aldehyde resin
Ketone-aldehyde condensation resin.
Industrial lacquers · Inks
- Softening point (B&R)
- 100 - 110°C
- Flow time @ 30°C (FC B-4) (50% solution in ethyl acetate)
- 20 - 30s; ASTM D 1200
Polyvinyl butyral (PVB)
Low-viscosity grade of polyvinyl butyral resin.
Printing inks
- Flow time @ 30°C of 20% solids in ethanol (Ford Cup B-4)
- 48 - 58s; ASTM D 1200
- Solids
- 96 - 100%; ASTM D 5907
Polyvinyl butyral (PVB)
Low-viscosity grade of polyvinyl butyral resin.
Flexo/gravure inks · Lacquers
- Flow time @ 30°C of 20% solids in ethanol (Ford Cup B-4)
- 48 - 58s; ASTM D 1200
- Solids
- 96 - 100%; ASTM D 5907
Polyvinyl butyral (PVB)
Low-viscosity grade of polyvinyl butyral resin.
Flexo/gravure inks · Two-pack paints
- Solids @ 100°C/30 min
- 96 - 100%; ASTM D 5907
- Acid value
- 1 maxmg KOH/g; ASTM D 1980-87
Polyvinyl butyral (PVB)
Low-viscosity grade of polyvinyl butyral resin.
Flexo/gravure inks · Lacquers
- Flow time @ 30°C (Ford Cup B-4), 10% solids in IMS
- 55 - 60s; ASTM D 1200
- Solids @ 100°C/30 min
- 96 - 100%; ASTM D 5907
Rheology additive
Castor-oil-derived rheology additive for paints that cure at ambient temperature.
Anti-sag/settling in epoxy, PU, alkyd, polyester and sealants
- Activation Temp
- 40 - 60°C
- Melting point
- 84 - 88°C
Rheology additive
Castor oil derivative containing polyamide.
Epoxy adhesives · Prefills
- Appearance
- White to amber flakes/powderVisual
Bio-based formulation modifier
Clear to pale yellow liquid produced by epoxidation of soybean oil.
PVC · Inks
- Oxirane oxygen
- 6.1 - 6.3%
- Flow time @ 27°C by FC-B4
- 125 - 135s; ASTM D 2196
Bio-based formulation modifier
Fatty acid ester containing more than 60% renewable bio-based material.
PVC · Coatings
- Hydroxyl value
- 140 - 180mg KOH/g; EN ISO 4962
- Viscosity @ 25°C (Brookfield)
- 30 - 100cP; ASTM D 2196
Bio-based formulation modifier
Fatty acid ester containing more than 90% renewable bio-based material.
Lubricants · Metalworking
- Hydroxyl value
- 160 minmg KOH/g; EN ISO 4962
- Viscosity @ 25°C (Brookfield)
- 20 - 60cP; ASTM D 2196
Rheology additive
Micronized polyamide based on castor.
Epoxy coatings · Adhesives
- Melting point
- 120 - 125°C; ASTM B 1525
- Appearance
- White powderVisual