Manufacturing
Specialty-resin production in Maharashtra and Gujarat.
Explore manufacturingResins for coatings, adhesives, sealants, elastomers and printing inks.
Explore the application or go straight to matching grades.

Materials for epoxy, cementitious PU, polyaspartic and decorative flooring systems.
The substrate · The system · Application & cure · The finished floor
Start with our company profile, then explore our application videos.
See how the resin and curing agent form the adhesive bond beneath a road marker.
A road stud catches the headlights. The part that holds it in place sits out of sight, between the marker and the pavement. The adhesive starts with two components. The first is a clear, solvent-free epoxy resin. The second is an amber reactive polyamide that cures the resin. For a resin with an epoxy equivalent weight of 190, the starting ratio is 50 parts hardener to 100 parts resin, by weight. Fillers and other ingredients affect the mix ratio for the finished kit. At the fixing point, prepare the pavement for the selected stud and remove loose debris. This stud design uses a drilled fixing point. The pale material on the underside is the formulated adhesive. As the marker is seated, the adhesive bed makes contact with the base and the prepared road surface. Press the stud into position and check its alignment with the road marking. Keep the reflector face clear. Good wetting helps the adhesive contact the surfaces. The polyamide also offers adhesion and resistance to water and chemicals. Check the finished bond on the actual pavement and marker base. In a laboratory test at 25 °C, a 150 g mix gels in 90–110 minutes. Reopen the lane only when the finished system meets the project's cure and traffic-release criteria. Contact D.R. Coats for samples, technical data and help developing a road-stud adhesive.
Met our team at a show?
Continue the conversationSpecialty-resin production in Maharashtra and Gujarat.
Explore manufacturingDiscuss material selection, your process and the next evaluation.
Talk to our technical teamRaw-material checks, finished-product testing and documented certificates.
View quality & certificatesShare your application, formulation question or supply requirement.