Formulation & processing

Polyurethane formulations

Find components with documented uses in polyurethane binder systems, synthesis, foams and moulding. Define the formulation route and the role of the component you are selecting.

Polyurethane formulations end use
Understand the application
UNDERSTAND THE APPLICATION

Define the system, then the component.

A polyurethane enquiry becomes more useful when the intended product, formulation stage and processing route are clear.

  1. Intended system

    Begin with the product being developed: a binder, applied coating, foam, moulded article or resin synthesis. Retain the specific application context when comparing grades.

    Selection focus

    Final product, formulation route and intended use.

    Discuss this requirement
  2. Component role

    State whether the enquiry concerns a polyol, isocyanate, prepolymer, curing component or formulation additive. Include the existing chemistry so the component can be assessed in context.

    Selection focus

    Required role and the other components already selected.

    Discuss this requirement
  3. Process and evaluation

    Describe the mixing, placement or moulding process and the available curing conditions. Evaluate the candidate in the intended complete system and process.

    Selection focus

    Processing method, curing conditions and trial objectives.

    Discuss this requirement
APPLICATION TO MATERIAL

Choose the component’s role.

Explore the documented candidates and the properties relevant to their role.

25 documented candidates across 11 roles

View all matching grades

Examples show different formulation roles. Choose a role to explore alternatives for that job.

Cementitious PU emulsion / binder

Drothane 2761

Hydroxyl value
75 - 95mg KOH/g; EN ISO 4629
Viscosity @ 25°C (Brookfield)
100 - 400cP; ASTM D 2196
Water content
28 - 32%
Equivalent weight, supply form
675 (approx)g/eq
Flexible castor-oil polyol

Drothane 1160

Hydroxyl value
169 - 188mg KOH/g; EN ISO 4629
Viscosity @ 25°C (Brookfield)
500 - 1500cP; ASTM D 2196
Moisture including volatiles
< 0.2%
Equivalent weight
315 (approx)g/eq
Reactive diluent / polyol modifier

Drothane 1156

Hydroxyl value
165 - 180mg KOH/g; EN ISO 4629
Viscosity @ 25°C (Brookfield)
800 - 1400cP; ASTM D 2196
Moisture including volatiles
< 0.2%
Equivalent weight
315 approxg/eq
APPLICATION FILM · 1:37

Flexible polyurethane coatings

Explore the roles of the polyol and hardener in a flexible polyurethane coating.

All application films
Read the film transcript

This cured sheet bends in the hand. It illustrates the flexibility a formulator can design into a two-part polyurethane coating. On steel, a coating needs to adhere to the surface it protects. This chemistry can be used to formulate anti-corrosion coatings. The first component is a pale yellow, solvent-free polyol made from castor oil. It contributes flexibility and adhesion. Its water-repellent character is also useful in protective coatings. The viscosity tells us how the polyol flows. The hydroxyl value helps the formulator calculate the hardener requirement. The second component is a modified MDI hardener. It has a lower viscosity, and an isocyanate content of twenty-five to twenty-eight percent. When the two parts are mixed, hydroxyl groups on the polyol react with isocyanate groups on the hardener. These links build a polyurethane network as the coating cures. On prepared concrete, this chemistry can be formulated into primers, sealers and flexible, water-resistant coatings. An indoor court is another development concept. Surface grip and impact absorption must both be tested on the complete flooring system. For a formulation trial, start with the substrate and the conditions the coating will face. Contact D.R. Coats for samples, technical data and formulation support.

Explore selection examples
APPLICATION / MATERIAL ROUTES

Choose the polyurethane route before the grade.

Binder formulation, foam and moulding development, and polyurethane synthesis involve different component roles. These examples provide starting points tied to the stated use of each grade.

Polyurethane binder systems3 grades to review

What shapes the choice

Drodur 5 and Drodur 10 are formulated aromatic isocyanates listed for PU binder systems. Drothane 2767 is a castor-oil polyol emulsion described for use with polymeric MDI as a binder, with concrete coatings, sealers and mortars among its applications. Identify which side of the binder system your enquiry concerns.

Grades to review

  • Drodur 5

    Formulated aromatic isocyanate containing MDI isomers and higher-functional MDI species.

  • Drodur 10

    Formulated aromatic isocyanate containing MDI isomers and higher-functional MDI species.

  • Drothane 2767

    Castor-oil-based polyol emulsion used with polymeric MDI as a binder.

Foams and moulding2 grades to review

What shapes the choice

Drothane 2150 is a bio-polyol used as a co-polyol in flexible and rigid foams. Drodur 102 is an MDI-based prepolymer listed for reaction injection moulding, footwear and foam. Describe the intended article and process when assessing either route.

Grades to review

  • Drothane 2150

    Bio-polyol based on a natural phenolic compound, with medium to high functionality.

  • Drodur 102

    Linear aromatic polyisocyanate prepolymer based on 4,4′-MDI and its isomers.

Synthesis and curing roles2 grades to review

What shapes the choice

Drodur I375 is an isophorone diisocyanate monomer listed for weatherable PU synthesis. Dromine 100 is described as a curing agent for polyurethane and epoxy resins, and as a chain extender for polyurea elastomers. Keep the chemistry and intended reaction role explicit in the enquiry.

Grades to review

  • Drodur I375

    Isophorone diisocyanate (IPDI), a cycloaliphatic diisocyanate.

  • Dromine 100

    Curing agent for epoxy resins and polyurethanes, and chain extender for polyurea elastomers.

Prepare a detailed technical brief Optional
YOUR NEXT CONVERSATION

Prepare your technical brief.

Answer only what you know. Review and edit the summary before continuing to the enquiry.

All answers are optional. Leave anything you do not know blank.

The summary updates as you answer.

Write my own enquiry

These answers prepare a discussion brief; they do not select or approve a grade. Your draft stays in this browser tab.