Drocarp 402
Polyurethane binder supplied as a two-component system for stone carpet flooring.
Decorative stone carpets · Wet areas
- Viscosity — Part A
- 3000 – 5000cP; Brookfield at 25°C
- Viscosity — Part B
- 2000 – 4000cP; Brookfield at 25°C
Two-component polyurethane binder formulated for lightfast stone carpet flooring.
A two-component polyurethane binder formulated for lightfast stone carpets, exterior paths and wet areas.
Follow the two-part polyurethane binder and aggregate from mixing and trowelling to the finished stone carpet.
What holds these pebbles together? A two-part polyurethane binder coats the stones while their natural colour and texture stay visible. Part A is a pale yellow resin. Part B is a clear aliphatic hardener. The binder is supplied solvent-free and is designed for lightfast stone flooring. River stone, quartz and marble give different finishes. Use clean, dry aggregate. Stone size affects how much aggregate the binder can coat. Weigh and mix the resin and hardener in the specified proportions. Add the binder to the stones and mix until they are evenly coated. Spread the mixture on the prepared surface and finish it with a trowel. The binder continues to cure after it gels. Follow the project specification before opening the surface to traffic. These three lab trial panels show how the choice of stone changes the finish. The system offers high flexural strength, low volatile organic compound content and good chemical resistance. Applications include cycle paths, garage ramps and parking areas. The same texture can extend to decorative benches and to paving around pools and fountains. Contact D. R. Coats to discuss your aggregate, substrate and service conditions.
Read every value with its unit and test conditions.
Source: TDS, 12th February, 2026 Ver.- 4. Values and test methods are as stated in this TDS.
| Property | Value / range | Unit & test conditions |
|---|---|---|
| Viscosity — Part A | 3000 – 5000 | cP; Brookfield at 25°C |
| Viscosity — Part B | 2000 – 4000 | cP; Brookfield at 25°C |
| Mixing ratio — Part A : Part B | 100:100 | phr |
| Gel time | 50 – 70 | min; 25°C; 100 g |
How to read technical properties · Evaluate the complete formulation in your intended process.