Algunos contenidos, documentos y vídeos solo están disponibles en inglés.
Modified cycloaliphatic amine curing agent

Drocure 5308

A low-color, low-viscosity modified cycloaliphatic amine for room-temperature epoxy cure.

Selection properties
Viscosity @ 25°C (Brookfield)
300-500cP; ASTM D 2196
Gel Time @ 25°C (100gm Mass with Epoxy Resin Eq. 190 at ratio R:H = 100:50)
55 - 60min
Gel time@25°C with EEW-190 by 100:60 ratio
40-50minutes
Mixing Ratio with epoxy resins (EEW 190)
60PHR
Asesoramiento de aplicación y suministro
WHAT IT OFFERS

Características principales

  • Low color
  • Low viscosity
  • For room-temperature epoxy cure
MAKE YOUR SHORTLIST

¿Encaja en su formulación?

Evaluate this cycloaliphatic curing agent for flooring, grouts or tank linings.

What decides the fit
Keep the two gel-time results separate: each uses its own resin-to-hardener ratio. Compare the complete test basis alongside viscosity when planning a trial.
Bring to your trial
Which epoxy resin and resin-to-hardener ratio will your application trial use?
Propiedades que conviene revisar juntas

Comparar published properties

Selected properties with matching published measurement conditions; compare the full profiles before evaluation.
PropertyDrocure 5308This gradeDrocure 5302Comparar with
Viscosity @ 25°C (Brookfield)cP; ASTM D 2196300-500200 - 400
Amine valuemg KOH/g; ASTM D 2074270-300380 - 410
WHERE IT FITS

Aplicaciones

  • Pavimentos
  • Grouts
  • Tanks
GRADE DETAILS

Datos técnicos

Read every value with its unit and test conditions.

Source: TDS, 09.01.2023 Rev.01. Values and test methods are as stated in this TDS.

Documents & samples ↑
PropertyValue / rangeUnit & test conditions
Physical Appearancewater white to pale yellow liquidVisual
Color2 MaxCGS; ASTM D 1544
Amine value270-300mg KOH/g; ASTM D 2074
Viscosity @ 25°C (Brookfield)300-500cP; ASTM D 2196
Equivalent Weight, Approx (AHEW)115Unit not stated in TDS
Gel Time @ 25°C (100gm Mass with Epoxy Resin Eq. 190 at ratio R:H = 100:50)55 - 60min
Mixing Ratio with epoxy resins (EEW 190)60PHR
Gel time@25°C with EEW-190 by 100:60 ratio40-50minutes
Density@25°C1.04Unit not stated in TDS

How to read technical properties · Evaluate the complete formulation in your intended process.