Algunos contenidos, documentos y vídeos solo están disponibles en inglés.
Modified aliphatic polyamine

Drocure 8302

An aliphatic amine curing agent for solvent-free epoxy formulations, with low viscosity and long pot life; recommended for heat-curing systems.

Selection properties
AHEW
70g/eq
Viscosity @ 25°C (Brookfield)
25 - 35cP; ASTM D 2196
Gel time @ 40°C (100 gms)
63 - 65min
Mixing ratio with epoxy resin (EEW 190)
40phr
Asesoramiento de aplicación y suministro
WHAT IT OFFERS

Key benefits

  • Long pot life
  • Low viscosity
  • For solvent-free epoxy formulations
  • Recommended for heat-curing systems
MAKE YOUR SHORTLIST

¿Encaja en su formulación?

Consider this long-pot-life aliphatic amine for solvent-free adhesive or hardener-blend development with heat cure.

What decides the fit
Review the heat-curing recommendation and the gel-time result measured at 40°C. Discuss the intended cure schedule alongside viscosity and the epoxy mixing basis.
Bring to your trial
What heat-cure schedule and adhesive or hardener-blend formulation will you evaluate?
Propiedades que conviene revisar juntas

Comparar published properties

Selected properties with matching published measurement conditions; compare the full profiles before evaluation.
PropertyDrocure 8302This gradeDrocure 5194Comparar with
AHEWg/eq7048
Mixing ratio with epoxy resin (EEW 190)phr4025
Viscosity @ 25°C (Brookfield)cP; ASTM D 219625 - 3550 - 240
WHERE IT FITS

Aplicaciones

  • Adhesives
  • Hardener blends
GRADE DETAILS

Datos técnicos

Read every value with its unit and test conditions.

Source: TDS, 10th October, 2025 Ver.- 1. Values and test methods are as stated in this TDS.

Documents & samples ↑
PropertyValue / rangeUnit & test conditions
AppearanceClear liquidVisual
Color2 maxCGS; ASTM D 1544
Amine value480 - 540mg KOH/g; ASTM D 2074
Viscosity @ 25°C (Brookfield)25 - 35cP; ASTM D 2196
AHEW70g/eq
Mixing ratio with epoxy resin (EEW 190)40phr
Gel time @ 40°C (100 gms)63 - 65min

How to read technical properties · Evaluate the complete formulation in your intended process.