Drocure 5172
A low-color, low-viscosity modified cycloaliphatic amine adduct for room-temperature epoxy cure.
Flooring · Grouts
- AHEW
- 86g/eq
- Viscosity @ 25°C (Brookfield)
- 900 - 1400cP; ASTM D 2196
A low-color, low-viscosity modified cycloaliphatic amine adduct for room-temperature epoxy cure.
Explore a low-color cycloaliphatic adduct for room-temperature flooring, grouts or tanks.
| Property | Drocure 9350This grade | Drocure 5151Comparar with |
|---|---|---|
| AHEWg/eq | 114 | 190 |
| Mixing ratio with epoxy resin (EEW 190)phr | 60 | 100 |
| Viscosity @ 25°C (Brookfield)cP; ASTM D 2196 | 100 - 400 | 60000-75000 |
Follow mixing, application and cure, including the difference between gel formation and continued curing.
The blue in this high-gloss epoxy finish comes from pigment in the coating base. The hardener is clear and has low viscosity. Once mixed with the epoxy resin, it starts a reaction that cures the coating at room temperature. Use the proportions specified for the complete coating system. Mix until uniform, then roll the coating onto the prepared surface. As the coating gels, it stops flowing. Curing continues beyond this stage. Allow the specified cure before putting the surface into service. The hardener adds very little colour. It supports high gloss, good colour stability and good resistance to amine blush, a waxy film that can form during cure. Applications include self-levelling floors, pebble-finish floors, high-solids coatings and decorative tile grouts. For chemical-resistant tank linings, match the formulation to the chemicals and exposure conditions. Contact D.R. Coats for technical data, samples and formulation guidance.
Read every value with its unit and test conditions.
Source: TDS, 18th October, 2022 Ver.- 1.1. Values and test methods are as stated in this TDS.
| Property | Value / range | Unit & test conditions |
|---|---|---|
| Appearance | Water white liquid | Visual |
| Color | 2 max | CGS; ASTM D 1544 |
| Amine value | 270 - 300 | mg KOH/g; ASTM D 2074 |
| Viscosity @ 25°C (Brookfield) | 100 - 400 | cP; ASTM D 2196 |
| AHEW | 114 | g/eq |
| Mixing ratio with epoxy resin (EEW 190) | 60 | phr |
| Gel time @ 25°C (100 gms) | 40 - 60 | min |
| Specific gravity @ 25°C | 1.01 - 1.05 | — |
How to read technical properties · Evaluate the complete formulation in your intended process.