Alguns conteúdos, documentos e vídeos estão disponíveis apenas em inglês.
Cycloaliphatic amine adduct

Drocure 9350

A low-color, low-viscosity modified cycloaliphatic amine adduct for room-temperature epoxy cure.

Selection properties
AHEW
114g/eq
Viscosity @ 25°C (Brookfield)
100 - 400cP; ASTM D 2196
Gel time @ 25°C (100 gms)
40 - 60min
Mixing ratio with epoxy resin (EEW 190)
60phr
Aconselhamento de aplicação e fornecimento
WHAT IT OFFERS

Características principais

  • Low color
  • Low viscosity
  • For room-temperature epoxy cure
MAKE YOUR SHORTLIST

É adequado à sua formulação?

Explore a low-color cycloaliphatic adduct for room-temperature flooring, grouts or tanks.

What decides the fit
Review supplied viscosity alongside AHEW and gel time. Compare these grade-specific values when narrowing a shortlist with similar application descriptions.
Bring to your trial
Which resin, application consistency and working time will guide your shortlist?
Propriedades a analisar em conjunto

Comparar published properties

Selected properties with matching published measurement conditions; compare the full profiles before evaluation.
PropertyDrocure 9350This gradeDrocure 5151Comparar with
AHEWg/eq114190
Mixing ratio with epoxy resin (EEW 190)phr60100
Viscosity @ 25°C (Brookfield)cP; ASTM D 2196100 - 40060000-75000
WHERE IT FITS

Aplicações

  • Pavimentos
  • Grouts
  • Tanks
APPLICATION FILM · 1:18

Revestimentos epóxi de alto brilho

Follow mixing, application and cure, including the difference between gel formation and continued curing.

All application films
Ler a transcrição

The blue in this high-gloss epoxy finish comes from pigment in the coating base. The hardener is clear and has low viscosity. Once mixed with the epoxy resin, it starts a reaction that cures the coating at room temperature. Use the proportions specified for the complete coating system. Mix until uniform, then roll the coating onto the prepared surface. As the coating gels, it stops flowing. Curing continues beyond this stage. Allow the specified cure before putting the surface into service. The hardener adds very little colour. It supports high gloss, good colour stability and good resistance to amine blush, a waxy film that can form during cure. Applications include self-levelling floors, pebble-finish floors, high-solids coatings and decorative tile grouts. For chemical-resistant tank linings, match the formulation to the chemicals and exposure conditions. Contact D.R. Coats for technical data, samples and formulation guidance.

GRADE DETAILS

Dados técnicos

Read every value with its unit and test conditions.

Source: TDS, 18th October, 2022 Ver.- 1.1. Values and test methods are as stated in this TDS.

Documents & samples ↑
PropertyValue / rangeUnit & test conditions
AppearanceWater white liquidVisual
Color2 maxCGS; ASTM D 1544
Amine value270 - 300mg KOH/g; ASTM D 2074
Viscosity @ 25°C (Brookfield)100 - 400cP; ASTM D 2196
AHEW114g/eq
Mixing ratio with epoxy resin (EEW 190)60phr
Gel time @ 25°C (100 gms)40 - 60min
Specific gravity @ 25°C1.01 - 1.05—

How to read technical properties · Evaluate the complete formulation in your intended process.